Boles Expert Flooring
Close-up of a multicolor flake floor

Flake epoxy flooring

A tough, decorative flake floor that goes in fast.

  • Installed in under two days
  • Decorative, textured finish
  • Strong bond

Our 100% solids epoxy flake floor is the simplest way to get a durable, seamless, decorative floor. Most are installed in less than two days, and they're built to last for years with little to no maintenance.

What it does

Installed in under two days

Most flake floors are finished in less than two days.

Decorative, textured finish

Color flake is broadcast into a tinted epoxy coat for a textured, multicolor look.

Strong bond

The slab is ground and primed with a penetrating primer, so the floor locks to the concrete.

Moisture barrier option

If the slab has a moisture problem, we add a moisture vapor barrier rated up to 100% relative humidity that meets the ASTM F3010 standard.

Low maintenance

Built to last for years with little to no maintenance.

Gloss or matte

A clear polyurethane topcoat finishes the floor, and a matte finish coat can be added.

Hot-tire resistant

The topcoat is rated hot-tire resistant, so warm tires won't pull it up.

Slip resistance tested

With a sand-and-flake texture, the topcoat tested at a 0.96 coefficient of friction.

Chemical resistant

Once fully cured (7 days), the topcoat is rated for 7 days of contact with fuels, oils, solvents, acids, caustics and cleaners.

How it's built

A seamless, textured flake finish in the color blend you choose.

  1. Clear topcoat
  2. Tinted epoxy and flake
  3. Moisture barrier (if needed)
  4. Penetrating primer
  5. Surface preparation
  6. Concrete slab
  1. 01

    Surface preparation

    The concrete is ground until it's clean and porous, and cracks, pops and spalls are patched.

  2. 02

    Penetrating primer

    A water-based primer soaks into the ground concrete and locks down, giving the floor a much stronger bond.

  3. 03

    Moisture barrier (if needed)

    Added when the slab has high moisture. Troweled on, it's rated up to 100% relative humidity.

  4. 04

    Tinted epoxy and flake

    A colored 100% solids epoxy coat is fully covered with decorative flake.

  5. 05

    Clear topcoat

    Loose flake is scraped and vacuumed away, then a 100% solids polyurethane topcoat seals the floor. A matte finish coat is optional.

At a glance

Best for
Fast, decorative floors on sound concrete
Look
Multicolor flake, textured
Goes over
Concrete
Main coating
100% solids epoxy
Flexible base (bridges minor cracks)
No
Moisture vapor barrier
Add-on, up to 100% RH
Topcoat and sheen
Polyurethane, gloss or matte
Surface
Textured
Back in use
Walk in 24 hrs, drive in 72 hrs
See how it compares with our other floors

Good to know

  • Foot traffic after 24 hours, vehicles after 72 hours.
  • Best on sound concrete. For cracked or damaged slabs, our flexible urethane floor is the stronger choice.
  • Full chemical resistance once the floor has cured for 7 days.

Options

  • Flake color blends
  • Matte finish
  • Moisture vapor barrier for damp slabs
Finished, gleaming commercial floor

Get a quote for flake epoxy flooring

Professionally installed by licensed, insured crews and backed by a lifetime installation warranty.