Boles Expert Flooring
High-gloss floor reflecting hangar lights

High-gloss performance system

A bright, five-layer floor built for fuel, fluids and sunlight.

  • Chemical resistant
  • Won't yellow
  • High-gloss finish

Our premium system stacks five layers: a penetrating primer, a flexible urethane base, a white epoxy base color and two tinted polyaspartic coats. The result is a smooth, glossy floor with three layers of color, built for heavy traffic, chemicals and UV exposure. It's the system behind our hangar floors.

What it does

Chemical resistant

Once cured, rated for 7 days of contact with jet fuel, gasoline, diesel, hydraulic oil, motor oil and transmission fluid.

Won't yellow

A UV-stable topcoat keeps its color in sunlight, unlike basic epoxy.

High-gloss finish

A smooth, bright, high-gloss surface.

Flexible, moisture-blocking base

The urethane base bridges minor cracks and doubles as a moisture vapor barrier, rated up to 97% relative humidity.

Wear and abrasion resistant

Two polyaspartic color coats add abrasion and wear resistance.

Custom logos

Logos can be installed right into the floor.

Pressure wash and steam clean

The topcoat stands up to pressure washing, steam cleaning, bleach, ammonia and solvents.

Hot-tire resistant

The topcoat is rated hot-tire resistant, so warm tires won't pull it up.

How it's built

A smooth, high-gloss finish with three integrated layers of color.

  1. High-gloss topcoat
  2. Color coat
  3. White base color
  4. Flexible urethane base
  5. Penetrating primer
  6. Surface preparation
  7. Concrete slab
  1. 01

    Surface preparation

    The concrete is ground to the right profile, and pops, spalls and cracks are repaired. Control and expansion joints are repaired when specified.

  2. 02

    Penetrating primer

    A water-based primer roots into the concrete for a much stronger bond.

  3. 03

    Flexible urethane base

    Bridges minor slab movement and cracks and blocks moisture vapor.

  4. 04

    White base color

    A 100% solids epoxy layer sets the white base color.

  5. 05

    Color coat

    A tinted polyaspartic coat adds color, durability, and chemical and abrasion resistance.

  6. 06

    High-gloss topcoat

    A tinted polyaspartic topcoat adds wear resistance, UV protection and a high-gloss finish.

At a glance

Best for
Hangars and bright spaces with fuel, fluids and sunlight
Look
Smooth, high gloss
Goes over
Concrete
Main coating
Urethane, epoxy and polyaspartic layers
Flexible base (bridges minor cracks)
Yes
Moisture vapor barrier
Built in, up to 97% RH
Topcoat and sheen
UV-stable high gloss
Surface
Smooth
Back in use
We'll confirm with your quote
See how it compares with our other floors

Good to know

  • This is a premium system. Its flexible, moisture-blocking base is what sets it apart from basic epoxy and polyaspartic floors.
  • Full chemical resistance once the floor has cured for 7 days.

Options

  • Custom logos
  • Choice of finish color
Finished, gleaming commercial floor

Get a quote for high-gloss performance system

Professionally installed by licensed, insured crews and backed by a lifetime installation warranty.