Boles Expert Flooring
Flake floor curving seamlessly up the wall

Flexible urethane flooring

Our gold-standard floor for damaged slabs and moisture problems.

  • Flexes with the slab
  • Blocks moisture
  • Waterproof and seamless

Built on a flexible urethane base coat, this is a highly resilient, waterproof floor. It's the most complete answer for damaged slabs and for moisture pushing up through the slab, and it's the system behind our mortuary floors.

What it does

Flexes with the slab

Urethane is more flexible than epoxy, so it handles minor slab movement and helps keep cracks from coming through.

Blocks moisture

The flexible base coat also works as a moisture vapor barrier, rated up to 97% relative humidity.

Waterproof and seamless

A highly resilient, waterproof floor with no grout lines.

Softer underfoot

Softer underfoot than other systems, which is easier on people who stand all day.

Flake or quartz

Choose a flake or quartz finish, with an optional second broadcast for extra durability.

Slip-resistant option

Slip-resistant beads can go in the topcoat for better traction without making the floor harder to clean. With a sand-and-flake texture, the topcoat tested at a 0.96 coefficient of friction.

Very low emissions

The flexible base coat is certified very low emission (EMICODE EC1 PLUS) and LEED-qualified, a good fit for healthcare, schools and occupied buildings.

Chemical resistant

Once fully cured (7 days), the topcoat is rated for 7 days of contact with fuels, oils, solvents, 40% formaldehyde, acids, caustics and cleaners.

Hot-tire resistant

The topcoat is rated hot-tire resistant, so warm tires won't pull it up.

How it's built

A seamless, textured flake or quartz finish that's softer underfoot.

  1. Clear topcoat
  2. Optional second broadcast
  3. Flexible urethane base
  4. Penetrating primer
  5. Surface preparation
  6. Concrete slab
  1. 01

    Surface preparation

    The concrete is diamond ground, and pops, spalls and cracks are repaired. Control and expansion joints are repaired when specified.

  2. 02

    Penetrating primer

    A water-based primer soaks into the ground concrete and locks down, giving the floor a much stronger bond.

  3. 03

    Flexible urethane base

    A tinted urethane coat is troweled on and back-rolled, then flake or quartz is broadcast into it while it's wet.

  4. 04

    Optional second broadcast

    A clear coat gets another full broadcast of flake or quartz for extra build.

  5. 05

    Clear topcoat

    One or two coats of 100% solids polyurethane. Two coats give a smoother finish, and slip-resistant beads are optional.

At a glance

Best for
Damaged slabs and moisture problems
Look
Flake or quartz, textured
Goes over
Concrete
Main coating
Flexible urethane
Flexible base (bridges minor cracks)
Yes
Moisture vapor barrier
Built in, up to 97% RH
Topcoat and sheen
Polyurethane, 1 or 2 coats
Surface
Textured, slip-resistant beads optional
Back in use
Walk in 24 hrs, drive in 72 hrs
See how it compares with our other floors

Good to know

  • Foot traffic after 24 hours, vehicles after 72 hours.
  • The most durable version is a double broadcast of quartz with two topcoats.
  • For outdoor installs, it's applied while temperatures are falling, which limits bubbling from the slab.
  • Full chemical resistance once the floor has cured for 7 days.

Options

  • Flake or quartz
  • Second broadcast
  • Second topcoat
  • Slip-resistant beads
  • Integral cove base
Finished, gleaming commercial floor

Get a quote for flexible urethane flooring

Professionally installed by licensed, insured crews and backed by a lifetime installation warranty.